So many points were raised after our last video that we have done an out-of-sequence realtime one to address the points raised.

And our heating system fails... in January!

http://www.saltylass.co.uk/hot-and-co...


----- Music -----
Back in the city - the 126ers
Youtube Audio Library

Captions:
[Music]

good morning with the back desk debasing

I'll tell you what this last week has

been brutal wind rain - sug ly typical

winter in Seattle just those storms roll

in one after another but look at this

Mother Nature has tossed us a little

treat I get four or five days of no rain

and look at the lake it's just calmed I

love it that means I'm gonna get some

serious work done

down in the hall so let's get to work

winds calm enough I was able to get the

sun shades back up

drying the decks no oh because it's nice

have dried acts because this is what

happens this time of year in Seattle

everything is just soaking wet the do

every single night gotta get it dry

uh okay it's time to get in the hole

I'll put on my hat this is I'm cold so

it works as a helmet keeps me from

injuring myself while I'm in there works

pretty good

not a lie the other day I spent a couple

hours in this hole and I was sore the

next day I was sore for three days so

I'm looking forward to this but it's

gotta get done if I do a little

stretches before I jump in the hole okay

let's take a look at what I'm gonna be

tackling today I did a little epoxy work

the other day and talked hearing all the

little holes and bits that it had done

or smooth and ready to be sanded out but

before I do that I'm gonna start working

on cleaning up this area right here this

deck knee needs to extend from here over

to here the pitch needs to travel

downhill this will be the high point

here needs to travel down to here and

then out here so if any water ever gets

into here it's gonna run straight out of

the boat I want to keep this area as dry

as possible because this is where some

linkages links will be elevated up here

so it'll never be close to water but I

still don't want standing water in this

area so first thing I'm gonna do is

start cleaning up things like here's an

old wood cleat just epoxy to the

bulkhead here I want to get this off cuz

what's the use I mean why not clean it

up now before I seal this in here kind

of clean up all these little edges and

and whatever this hole is up here I have

no idea I want to fill this and cuz I

want this to be a smooth transition

across here I want to these areas where

moisture or mold

collect and just start cleaning up all

this area so I could get this deck in

[Music]

this little town almost tabbed into the

hole and up over the top here but it's a

little tease lamb right here so I've cut

it back even to the rest of this tab and

now let's remove this there we go clean

that up it's amazing how many fixes I

come across on this foot where somebody

just literally this dumped resin

it's not very strong it's very brittle

and any time I see it I chisel down

you have to make a pretty big cut here

in order to get this deck to pitch

downhill here this is what I need to do

this is a very jagged cut anyway and

that I'll pitch it down nicely

[Music]

just trying to get any loose epoxy

chunks off this back wall exciting to

clean this up next I'm gonna sandal this

out kind of vacuum everything up see

where I stand because I want to be able

to cut this deck in neck so I'll get

after I clean up I'll get some hard

measurements taking a little break here

Lynn's gonna relieve me for a few

minutes and clean up my mess

actually hand me all that scraps that

are in there

okay fill those little scraps down there

hand me those first then I'll hit the

vacuum okay

documenting it's clean

thank you so clean in here no nice for

up to Lynne she'd be down here doing all

this she has no problem grabbing a

sander her saw and just getting down and

dusty she's pretty awesome

what are you doing up there scare me

okay can you grab me the detail sander

it's right there in the cockpit okay

thank you

[Music]

Emma Emma Emma come here

okay can you grab me another tool grab

me let's see it's it's on a drill it's a

little drum sander on the drill it

should be sitting over in the exterior

galley in the cockpit there look around

you see a drill that's it heavy that and

then here take this to getting 20 tools

better I'm done with this one okay

okay thank you she's awesome

okay I think I'm about about ready lens

mixing me up some epoxy here she is

yeah I'm ready almost spill it

do not fall me starting to get cold

that's why I'm want to get this in okay

thank you I might need a little more

I'll let you know okay what I'm gonna do

such I'm gonna be working on this deck

piece tomorrow to mount a little pleat

here this won't add much strength to

this it's just gonna hold it while I'm

getting it all collapsed in place and I

make this out of this is just that foam

fill PVC ultra lightweight it's epoxy

sticks to it nicely so I'm gonna go

through and fill some more stuff little

dings and gouges flow a couple more

little pieces here a little hole here at

the end of each day just a little bit

more we want to fill this today too

just got put a nice bead of a thickened

epoxy on here doesn't need much

[Music]

just about like that and this cleat just

gonna help down a little tomorrow listen

first thing I wanted to do make sure I

got this in today

[Music]

[Music]

there we go I took that would clean off

this back wall here I want to make sure

that get some foxy on here case I

couched that bulkhead plus it'll smooth

it out little by little this little room

just gonna get smoother and smoother

now let's take a look at this I won't

start this bulkhead soon to start

smoothing this out everyday just a

little more

I feel like Bob Ross painting a picture

okay I'll just stay at it once I get

this wall on right here I'm gonna be

running glass cloth over this whole

thing and tying it all the way down over

this bug bulkhead but the tabs that were

tabbing this to the walls were drastic

I've tapered them slightly that's why

I'm using epoxy just to fair it and

every day I get a little smoother I'll

stand this out again and fill it in and

eventually this will be somewhat smooth

coming across here so when I start

laying the glass cloth on I don't have

these radical ridges to work with after

the glass cloth then I'll fear it but

you can see where I've tapered this down

let's get in there definitely starting

to smooth out

lenz just mixing me up a little epoxy

with a white pigment to fill this groove

right here I don't I don't need the

white pigment so I'm gonna be wrapping

this with glass cloth but I figured

since this had white pigment I might as

well just finish it off are you ready

I'm ready I don't know if it's white

enough but well it doesn't even need to

be pigmented but I thought it might as

well since they have it so sticky okay

thank you

and baby wipe cleans up your cards at

the end of the day if we use that one

okay I think it's time to get out of

here I hate it again tomorrow you guys

today is unbelievably warm it is 20

degrees above normal temperatures here

it's not raining it's just absolutely

spectacular we can't complain and it

gives us an opportunity to work in our

sugar scoops without worrying about rain

or putting extra heat in here yeah

putting extra heat we had tried to

figure out how to get some heat in there

to get everything to kick and we don't

have to know I'm only wearing

long-sleeve so I don't get itchy I I'm

sweating in this tonight look at the

lake look at this it's beautiful well

the only thing is is there's no wind so

these sailboats are not going but it's

pretty spectacular let's get cleaned up

and the day yeah we don't do that very

often sounds good to me

there we go I'm shutting her down oh

you're showing your age I am right I

gotta stop fronting when I stand up

[Music]

it's a gorgeous day and I decided that

even though it's kind of chilly out

still we're gonna have breakfast outside

and there's ready had breakfast so it's

just gonna be tonight I hope I can

convince him to just take a little break

and get some nourishment in him so let's

go see what the captain is up to this is

gorgeous I cannot believe we are in

January Lakes called nice and dry

and teal has already got it started okay

take these

hey good breakfast and fresh coffee

love it take a break I will everything

kicked looks good Oh

[Music]

breakfast was good made me tired though

good sleep in here but it's too nice out

gotta get some work done kid the epoxy

work I did yesterday it's looking pretty

gnarly looking here but believe it or

not this is I mean it's getting smoother

and smoother every day everything's

secured so let's work on what I'll do

first it's just touched and everything I

epoxy yesterday and then I'm gonna get

some hard measurements off this night a

core panel I'm going to be inserting in

here and let's do that first

I'm also going to cut a little nine core

panel for up here they'll insert into

here to flatten this out

so let's get to sanding

everything feels real smooth let's get

some measurements for this piece ninety

Corey I have to cut I'm gonna use a

honeycomb structural panel to fill that

in and that's what this entire boats

made out of the hole there's a couple of

bulkheads like this right here that may

have some wood in it but for the most

part we are the majority honeycomb

composites there's multiple trade names

for this I've got some scraps right here

this is Kanak or ninety core

here's ninety core that's already pre

laid up with an epoxy top coat but I

mostly get it wrong like this here's

some they have a carbon fiber inlay in

it all of them have this polypropylene

honeycomb core just lightweight I mean

these weigh nothing

it's amazing how light these are for the

strength you get when you're done I have

to lay up half-inch in there I've got

some half-inch right here that's raw but

I have this piece right here I'll use

they'll save me some time because it's

already pre laid up so let's cut that

one first

I had to tilt this back five degrees for

the pitch of the whole there just take a

look out this fits in here now

[Music]

looks pretty good

wanna make sure it's pitched correctly

want water to be able to run out if it

gets in here nicely there and then the

other way is this way okay everything's

looking good let's get this epoxy it in

I've been to my little spacer up here so

I'm not just burying a a cup of epoxy in

here I just have a little bit now to get

that to fair and smooth then cloth goes

over this whole thing but it's getting

cleaner every day okay I just buttered

up the perimeter of this with West

system epoxy thickened with a Clyde o

silica and if I get this in without

making a mess here

let's eat in there

now I'll be able to bear the perimeter

and let this cure overnight looks good

oh by one inch radius in all the corners

[Music]

okay let's see where we stand here this

piece is all laminated in fared around

the edges I've got my filler piece up

here laminated in and faired around the

edges starting to clean up here I'm not

going to treat this this end grain of

this 90 core yet I'm going to wait for

it to kick and then I'll be able to

crush this back a little bit when I put

this wall down I'll be able to put a

light layer of filler in here then layer

it over with glass but as I always do at

the end of each day picking some bad

spots and get rid of some of these bumps

and ridges

okay I'm feeling pretty good

this bulkheads starting to smooth out

boy there are some pretty gnarly tabs

that were tabbing that bulkhead to the

wall and that's what I'm working on now

getting those smoothed out I just want

everything to be smooth enough to jump

down your bare foot and be comfortable

anyway let this fire off tonight

it's still quite a nice day out here

I suppose I could go jump in the other

hull and start working on that sugar

scoop or

do I enjoy the day where's the Sun at

I got a little time left I'm gonna go

prep that other sugar scoop starting to

fall behind on that side okay thanks for

watching the video if you know what

I'm gonna be honest I'm a little haunted

I'm humbled that our story the us

sharing our story with you that you find

it interesting enough to follow our

channel you know we've met a ton of real

interesting people with a lot of great

ideas keep those come in the comments

because I read every single one and I'm

learning everyday I especially want to

thank our patrons you guys are awesome

thank you so much

and

let's get back to work

[Music]

I'm just kidding see you next week